Filter
Top Products
Figure 1. SC180 Expansion Enclosure Components
1. Documentation 2. Hard Drives
3. Expansion enclosure 4. Rack rails
WARNING: Two people using lift straps are required to lift the expansion enclosure to avoid
injury.
Installing the Expansion Enclosure in a Rack
Install the SC180 expansion enclosure in a rack.
NOTE: Mount the expansion enclosure in a manner that allows for expansion in the rack and
prevents the rack from becoming top‐heavy.
WARNING: If you plan to install the expansion enclosure above the lower 20U of a rack, a
customer-provided mechanical lift must be used to avoid injury.
1. Assemble the rails following the safety instructions and the rack installation instructions provided
with your
expansion enclosure.
2. Determine where to mount the expansion enclosure in the rack and mark the location.
3. Install the rack rails at the marked location.
4. Mount the expansion enclosure chassis on the rails.
5