Back to Contents Page
Bluetooth™Module
Dell™Latitude™X300ServiceManual
Replacing the Bluetooth Module
1. Remove the M2 x 5-mm screw.
2. Disconnect the cable from the system board.
3. Lift the assembly out.
4. To replace the Bluetooth module:
a. Replace the assembly.
b. Connect the cable to the system board.
c. Replace the screw.
Back to Contents Page
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the System Information Guide.
1
M2 x 5-mm screw
2
Bluetooth module
2U381
3
Bluetooth module cable
4
connector on system board