Dell X300 Battery Charger User Manual


 
Back to Contents Page
Keyboard
Dell™Latitude™X300ServiceManual
Removing the Keyboard
Replacing the Keyboard
Removing the Keyboard
1. Remove the battery.
2. Remove the four M2 x 4-mm screws labeled with an arrow from the bottom of the computer.
3. Turnthecomputerover,andinserta¼-inch flat-blade screwdriver into the slot to the right of the keyboard locator tab.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the System Information Guide.
NOTICE: Disconnect the computer and any attached devices from electrical outlets.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE: Read "Before You Begin" before performing the following procedure.
1
M2 x 4-mm screws (4)
98MKC
NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the
keyboard.