Delta 22-590 Planer User Manual


 
7
ASSEMBLY
To reduce the risk of injury, turn unit off and disconnect it from power source before installing and
removing accessories, before adjusting or when making repairs. An accidental start-up can cause injury.
HOW TO INSTALL THE DUST COLLECTION ATTACHMENT
C
Fig. 4Fig. 3
1. Remove the two screws (A) Fig. 1C that secure the dust deflector.
2. Remove the dust deflector (B) Fig. 2.
3. Place the dust collection attachment (C) Fig. 3 in the slots provided.
4. Attach the dust collection attachment with the four M6 star socket head screws (D) Fig. 4. Two of these screws were
removed in STEP 1. Tighten all fasteners securely.
5. Reverse the procedure for installing the dust deflector. Install the dust deflector with the label up and curved lip
pointing down.
A
B
Fig. 1C
Fig. 2
Disconnect the machine from the power source.
You have two options for dust management. The  rst is the dust de ector and the second is the dust collection attach-
ment to attach your machine to a dust collector.
HOW TO PREPARE FOR DUST MANAGEMENT
D
When using the dust collection attachment, do not operate the unit without a hose connected and a dust
collector in operation.
ASSEMBLY TOOLS REQUIRED
Cutterhead Wrench (Supplied)
ASSEMBLY TIME ESTIMATE
Approximately 1/2 hour