Filter
Top Products
20
Fig. 55
Fig. 56
Fig. 58Fig. 57
FOLDING STAND
FOR TRANSPORTATION
(FOR MODEL 36-250 ONLY)
1. Lock cuttinghead in the down and outward position.
Rotate table to the 45 degree right angle position.
Extension tables and fences should be pushed in toward
the saw table and locked in place.
2. Loosen two locking knobs (G) Fig. 55. While holding
legs (A), as shown, press spring-loaded detents (B) with
your thumbs and carefully lower upper legs. Tighten
locking knobs (G) Fig. 55.
3. Fig. 56, illustrates the left leg (C) lowered. Lower the
right leg (D) in the same manner.
4. Unlock hinges on left leg and fold left leg (C) in, as shown in Fig. 57.
5. Tilt machine on its side, as shown in Fig. 58, and continue to fold left leg (C) all the way underneath
saw base. Leg (C) will contact and unlock hinges (E) of right leg (D), enabling right leg (D) to be folded.
B
B
A
A
C
D
C
E
C
D
G
G