Filter
Top Products
24
TROUBLESHOOTING
For assistance with your machine, visit our website at www.deltamachinery.com for a list of service centers or call the DELTA
Machinery help line at 1-800-223-7278 (In Canada call 1-800-463-3582).
MAINTENANCE
KEEP MACHINE CLEAN
Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp cloth.
NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material.
Wear certified safety equipment for eye, hearing and respiratory protection while using compressed air.
FAILURE TO START
Should your machine fail to start, check to make sure the prongs on the cord plug are making good contact in the outlet.
Also, check for blown fuses or open circuit breakers in the line.
LUBRICATION & RUST PROTECTION
Apply household floor paste wax to the machine table, extension table or other work surface weekly. Or use a commercially
available protective product designed for this purpose. Follow the manufacturer’s instructions for use and safety.
To clean cast iron tables of rust, you will need the following materials: a sheet of medium Scotch-Brite™ Blending Hand Pad,
a can of WD-40
®
and a can of degreaser. Apply the WD-40 and polish the table surface with the Scotch-Brite pad. Degrease
the table, then apply the protective product as described above.
REPLACEMENT PARTS
Use only identical replacement parts. For a parts list or to order
parts, visit our website at
servicenet.deltamachinery.com.
You
can also order parts from your nearest factory-owned branch,
or by calling our Customer Care Center at 1-800-223-7278 to
receive personalized support from highly-trained technicians.
FREE WARNING LABEL REPLACEMENT
If your warning labels become illegible or are missing, call
1-800-223-7278
for a free replacement.
SERVICE
SERVICE AND REPAIRS
All quality tools will eventually require servicing and/or
replacement of parts. For information about Delta Machinery,
its factory-owned branches, or an Authorized Warranty Service
Center, visit our website at www.deltamachinery.com or call
our Customer Care Center at 1-800-223-7278. All repairs made
by our service centers are fully guaranteed against defective
material and workmanship. We cannot guarantee repairs made
or attempted by others.
You can also write to us for information at Delta Machinery,
4825 Highway 45 North, Jackson, Tennessee 38305 - Attention:
Product Service. Be sure to include all of the information shown
on the nameplate of your tool (model number, type, serial
number, etc.)
FOR YOUR OWN SAFETY
READ AND UNDERSTAND INSTRUCTION MANUAL BEFORE OPERATING
TABLE SAW.
ALWAYS WEAR PROPER EYE AND RESPIRATORY PROTECTION.
ALWAYS USE BLADE GUARD AND SPLITTER FOR EVERY OPERATION FOR
WHICH IT CAN BE USED, INCLUDING ALL THROUGH SAWING. KEEP HANDS
OUT OF PATH OF THE LINE OF THE SAW BLADE. USE PUSH STICK WHEN
REQUIRED. DO NOT PERFORM ANY OPERATION FREE HAND. USE FENCE
WHEN RIPPING AND MITER GAGE WHEN CROSS-CUTTING. NEVER USE THE
MITER GAUGE AND RIP FENCE TOGETHER. KNOW HOW TO AVOID RISK OF
KICKBACK. NEVER REACH IN BACK OF OR OVER SAW BLADE. DO NOT
REMOVE JAMMED OR CUT-OFF PIECES UNTIL BLADE HAS STOPPED.
DISCONNECT MACHINE FROM POWER SOURCE BEFORE MAKING REPAIRS
OR ADJUSTMENTS. DO NOT EXPOSE TO RAIN OR USE IN DAMP LOCATIONS.
WHEN USING THIS TOOL, DO NOT WEAR GLOVES, NECKTIES, JEWELRY OR
LOOSE CLOTHING. WEAR PROTECTIVE HAIR COVERING TO CONTAIN LONG
HAIR. TIGHTEN THE BLADE ARBOR NUT SECURELY BEFORE OPERATING. DO
NOT USE THE MACHINE WHEN YOU ARE TIRED OR UNDER THE INFLUENCE
OF DRUGS, ALCOHOL OR MEDICATION. DO NOT OPERATE SAW WITH THE
FOOT LEVER CASTER IN THE DOWN POSITION. FAILURE TO FOLLOW THESE
SAFETY RULES MAY RESULT IN SERIOUS PERSONAL INJURY.
PARA SU PROPIA SEGURIDAD
LEA Y COMPRENDA EL MANUAL DE INSTRUCCIONES ANTES DE UTILIZAR
LA SIERRA DE MESA.
SIEMPRE SE DEBERÁ LLEVAR LA PROTECCIÓN
APROPIADA PARA LA VISTA Y PARA LAS VÍAS RESPIRATORIAS. UTILICE
SIEMPRE EL ENSAMBLE DEL PROTECTOR DE LA HOJA Y EL HENDEDOR
PARA CUALQUIER OPERACIÓN EN LA QUE SE PUEDA UTILIZAR, INCLUIDOS
TODOS LOS CORTES CON SIERRA. MANTENGA LAS MANOS ALEJADAS DEL
TRAYECTO DE LA HOJA DE LA SIERRA. UTILICE LA VARA PARA EMPUJAR
CUANDO SEA NECESARIO. NO REALICE NINGUNA OPERACIÓN SIN USAR LAS
MANOS. UTILICE LA GUÍA DE CORTE CONJUNTAMENTE. SEPA CÓMO EVITAR
EL RIESGO DE RETROCESOS. NUNCA SE ESTIRE PARA ALCANZAR ALGO
DETRÁSO SOBRE LA HOJA DE LA SIERRA. NO RETIRE PIEZAS ATASCADAS O
CORTADAS HASTA QUE LA HOJA SE HAYA DETENIDO. DESCONECTE LA
MÁQUINA DE LA FUENTE DE ENERGÍA ANTES DE REALIZAR REPARACIONES
O AJUSTES. NO EXPONGA A LA LLUVIA NI UTILICE EN LUGARES HÚMEDOS.
NO UTILICE GUANTES, CORBATAS ALHAJAS NI ROPA HOLGADA CUANDO
USE ESTA HERRAMIENTA. SI TIENE EL CABELLO LARGO, RECÓJALO Y
CÚBRALO. AJUSTE BIEN LA TUERCA DE EJE DE LA HOJA ANTES DE OPERAR
LA UNIDAD. NO UTILICE LA MÁQUINA SI ESTÁ CANSADO, O BAJO EL EFECTO
DE DROGAS, ALCOHOL O MEDICAMENTOS. NO OPERE LA SIERRA CUANDO
LA RUEDA DE LA PATA NIVELADORA ESTÉ EN LA POSICIÓN HACIA ABAJO. EL
INCUMPLIMIENTO DE ESTAS NORMAS DE SEGURIDAD PUEDE PROVOCAR
DAÑOS PERSONALES GRAVES.
POUR VOTRE PROPRE SÉCURITÉ
BIEN LIRE ET COMPRENDRE LE MODE D’EMPLOI AVANT D’UTILISER LE
BANC DE SCIE.
IL FAUT TOUJOURS PORTER DE L'ÉQUIPEMENT DE
PROTECTION OCULAIRE ET RESPIRATOIRE APPROPRIÉ. TOUJOURS UTILISER
UN PARE-MAIN ET UN COUTEAU SÉPARATEUR POUR TOUTES LES
OPÉRATIONS DEMANDANT SON UTILISATION, Y COMPRIS TOUT DÉBITAGE
COMPLET. GARDER LES MAINS HORS DE LA TRAJECTOIRE DE LA LAME DE LA
SCIE. UTILISER UN POUSSOIR AU BESOIN. EFFECTUER TOUTE OPÉRATION EN
TENANT L’OUTIL DES DEUX MAINS. UTILISER LE GUIDE LONGITUDINAL POUR
LE SCIAGE EN LONG ET LA JAUGE À ONGLET POUR LE TRONÇONNAGE. NE
JAMAIS UTLISER; A JAUGE À ONGLET ET LE GUIDE LONGITUDINAL EN MÊME
TEMPS. CONNAÎTRE LES TECHNIQUES POUR EMPÊCHER LE RISQUE ASSOCIÉ
À L’EFFET DE REBOND. NE JAMAIS PASSER LES MAINS À L’ARRIÈRE OU
AU-DESSUS DE LA LAME DE LA SCIE. NE PAS RETIRER LES PIÈCES COUPÉES
OU COINCÉES AVANT L’ARRÊT COMPLET DE LA LAME. DÉBRANCHER LA
MACHINE DE LA SOURCE D’ALIMENTATION AVANT D’EFFECTUER DES
RÉPARATIONS OU DES RÉGLAGES. NE PAS EXPOSER LA SCIE À LA PLUIE ET
NE PAS L’UTILISER DANS UN ENDRIOT HUMIDE. LORS DE L’UTILISATION DE
CET OUTIL, NE PAS PORTER NI GANT, NI CRAVATES, NI BIJOUX OU
VÊTEMENTS AMPLES. SE COUVRIR LES CHEVEUX S’ILS SONT LONGS. SERRER
SOLIDEMENT L’ ÉCROU D’AXE DE LA LAME AVANT DE L’UTILISER. NE PAS
UTILISER LA MACHINE EN CAS DE FATIGUE OU SOUS L’INFLUENCE DE
DROGUES, D’ALCOOL OU DE MÉDICAMENTS. NE PAS UTILISER LA SCIE AVEC
LA COMMANDE À PIEDS DES ROULETTES EN POSITION BASSE. NÉGLIGER DE
SUIVRE TOUS CES RÈGLES DE SÉCURITÉ PEUT ENTRAÎ.
A18588