Filter
Top Products
7
FOREWORD
The Delta 10" Hybrid saw (36-714B) has a powerful 1-3/4 HP induction motor that can handle tough cutting operations. This
table saw has a maximum depth of cut of 3-1/8" (79mm) at 90° and 2-1/8" (54mm) at 45°. The maximum dado width with this
saw is 13/16" (21mm). The saw comes with two cast-iron extension wings, one of three fence systems, see-through blade
guard and splitter, table insert, equipment mounting hooks, a 10" diameter blade, dust port for 4" hose, and miter gauge.
NOTICE: The illustration on the manual cover illustrates the current production model. All other illustrations contained in the
manual are representative only and may not depict the actual labeling or accessories included. These are intended to illustrate
technique only.
FUNCTIONAL DESCRIPTION
CARTON CONTENTS
1. Cast Iron Extension Wings (2)
2. Fence Holder Brackets (2)
3. 10” Carbide-Tipped Blade
4. Blade Wrenches (2)
5. 4mm Hex Wrench
6. Dust Port
7. Locking Knobs (2)
8. Handwheel (2)
9. Miter Gage
10. Splitter/Guard Assembly
11. Switch Assembly
12. Drive Belt
13. Splitter Mounting Bracket
14. Wrench Hook
1. 7/16"-20 x 1-1/4" Hex Head Screw (6)
2. 7/16" Flat Washer (6)
3. 7/16" Lock Washer (6)
4. M4 x 8mm Round Head Screw (2)
5. 1/4"-20 x 3/8" Self-Tapping Screw (8)
6. 5/16" External Tooth Washer
7. Nylon Washer (2)
8. 5/16"-18 x 5/8 Carriage Head Screw (1)
9. 5/16" hex nut (1)
10. 5/16" flat washer (1
11. 1/4" Lock Washer (2)
12. 1/4" Flat Washer (2)
13. 1/4"-20 x 3/4" Hex Head Screw (2)
1
2
6 7 8
9 10 11
3
4
5
12
13
9
10
11
7
8
3
12
2
1
4
5
6
13
14