Filter
Top Products
16
Fig. 36
ASSEMBLING RIP FENCE
HOLDER BRACKETS
Assemble the rip fence holder brackets (A) and (B) Fig.
37, to the four holes located in the right hand side of the
saw cabinet using four #10 x 1/2" sheet metal screws
supplied.
Fig. 38
Fig. 37
A
B
ASSEMBLING DUST CHUTE
ADAPTER
The Unisaw is supplied with a dust chute connector to
provide a means of connecting a 4" diameter dust
collector hose to the machine. Align the four holes in the
dust chute adapter (A) Fig. 38,with the four holes in the
back of the motor cabinet (B) and attach the dust chute
adapter with four #10 x 1/2" sheet metal screws. NOTE:
DO NOT MOUNT THE DUST CHUTE ADAPTER
UNLESS A DUST COLLECTION SYSTEM IS USED IN
CONJUNCTION WITH THE SAW, AS THE DUST
CHUTE ADAPTER WILL RESTRICT THE GRAVITY
FEED OPENING FOR SAW DUST REMOVAL.
MITER GAGE HOLDER AND
WRENCH HOLDER
The miter gage (A) Fig.36, and arbor wrenches (B), can
be stored in the slots provided in the motor cover, as
shown in Fig. 36.
A
B
A
B