Filter
Top Products
4
UNPACKING AND CLEANING
Carefully unpack the tool and all loose items from the shipping container(s). Remove the protective coating from all
unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline
or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste
wax. ILLUSTRATIONS ARE REPRESENTATIVE ONLY AND MAY NOT DEPICT THE ACTUAL COLOR, LABELING
OR ACCESSORIES AND MAY BE INTENDED TO ILLUSTRATE TECHNIQUE ONLY
Fig. 2
1 -Locking Bands for
Filter and Dust
Collection Bags (2)
2-Filter Bag
3-Dust Collection Bag
4 -Filter Bag Support Rod
5-Extension Rod
6-Clamps (2)
7 -6" Dia. Flexible Hose
8 -Drum Support (3)
9 -Casters (3/8"
Lockwashers,
3/8-16 Hex Nuts) (4)
10 -“U” Bracket for Filter Bag
Support Rod
11 -Lower Dust Bag
retaining Clips (4)
Fig. 3
12 -Blower and Motor
Assembly
13 -Clamp
14 -4" Dia. Flexible Hose
15 - Intake Port
16 -Base
17 -Intake Caps (2)
18 -Drum
Fig. 2
Fig. 3
1
2
3
4
5
6
7
8
9
10
12
13
14
15
16
17
18
11
HARDWARE NOT SHOWN
* -5/16"-18 x 5/8"
Hex Head Screws (20)
* - 5/16" Lockwashers (24)
* -5/16"-18 Hex Nuts (12)
* -5/16" x 7/8" O.D.
Flat Washers (6)
* - M4.2 Sheet Metal
Screws (4)
* -1/4-20x5/8" Hex Head
Screws (8)
* -1/4" Lockwashers (8)
* -1/4"-20 Hex Nuts (8)