Filter
Top Products
19
105635
6. Remove piston assembly from barrel (see Figure 4).
B. REMOVING REAR PAD AND HANDLE PAD ASSEMBLY
1. Loosen screws on back of handle pad assembly and rear pad with 3mm Allen
wrench.
2. Remove assembly handle pad and rear pad. Do not remove the screw from the
assembly handle pad (see Figure 5).
3mm Allen Wrench
Figure 5 - Removing Handle Pad Assembly and Rear Pad
Screws
Figure 4 - Removing Piston Assembly from Barrel
Rear Pad
Continued
Piston
Assembly
Handle Pad Assembly
Figure 6 - Removing Rocker Arm
Assembly from Housing
Figure 7 - Removing Rocker Arm
Spring from Handle Pad
Rocker Arm
Spring
Assembly
Handle Pad
Rocker Arm
Assembly
Barrel
C. REMOVING ROCKER ARM ASSEMBLY
1. Rocker arm assembly is located in housing. Pull rocker arm assembly out of
housing (see Figure 6).
2. Pull rocker arm spring away from handle pad assembly to remove (see Figure 7).