Filter
Top Products
10
TRI TOOL INC.
92-0116 : Rev. 060810
OPERATION
Read the operating instructions carefully before attempting to operate the Model 550
Tube Severing Tool.
Be sure to use eye protection at all times when operating the Model 550.
Select the proper Model 550 for the size of tubing to be severed.
Maximum Tube Wall Thickness
Model
No.
Tube
Size
Aluminum
Stainless
Steel
Titanium
550-03 3/16" (4.8 mm) .065" (1.6 mm) .065" (1.6 mm) .065" (1.6 mm)
550-04 1/4" (6.4 mm)
550-05 5/16" (7.9 mm)
550-06 3/8" (9.5 mm)
550-08 1/2" (12.7 mm) .095" (2.4 mm) .100" (2.5 mm) .100" (2.5 mm)
550-10 5/8" (15.9 mm) .125" (3.2 mm)
550-12 3/4" (19.1 mm) .095" (2.4 mm)
550-14 7/8" (22.2 mm) .125" (3.2 mm)
550-16 1" (25.4 mm) .095" (2.4 mm)
550-18 1 1/8" (28.6 mm) .125" (3.2 mm)
550-20 1 1/4" (31.8 mm) .100" (2.5 mm)
550-24 1 1/2" (38.1 mm) .110" (2.8 mm)
550-28 1 3/4" (44.5 mm) .125" (3.2 mm)
550-32 2" (50.8 mm)
Be sure the Cutter Wheel of the Tube Severing Tool you have selected is sharp,
rotates freely and is not damaged in any way.
A damaged or non-rotating Cutter Wheel can affect the performance of the tool.
Be sure Bearing Plugs are clean and not damaged.
Damaged Bearing Plugs affect the performance of the tool and should be changed.