Filter
Top Products
11
Model 550 Tube Severing Tool
92-0116 : Rev. 060810
NOTE:
Select the proper Tri Tool Inc. Drive Unit that best suits the operation needed to be
performed.
Drive Input Location
A non Tri Tool Inc. Drive Unit will void the warranty.
If input is counterclockwise, sever damage will occur during cutting.
CONNECTING AND DISCONNECTING THE DRIVE SYSTEM TO THE MODEL 550
The entire series of Model 550 Tube Cutters are equipped with a quick disconnect
drive-mounting system.
The drive units, which are equipped with a mating quick disconnect, are universal,
they will operate with any Model 550 size that is selected.
! WARNING !
Disconnect the Drive Unit from its power source
when installing or removing it from the Model 550
Tub Cutter otherwise serious injury may occur.
To connect an air or electric drive unit, simply align the slots of the drive system to
the pin located inside the Model 550 coupling, push the drive system inward and
rotate counterclockwise and release.
The drive unit is equipped with a spring to allow it to lock securely.
The drive unit should now be locked in place.
Align the slot.
The rotation direction of the input must be clockwise.