Filter
Top Products
12
TRI TOOL INC.
92-0116 : Rev. 060810
Rotate drive shaft in a clockwise direction to align the slot.
If you miss alignment, simply realign the slot.
Load the Model 550 around the tube to be cut.
Apply a light force to insure that the Model 550 is over the tube.
The Model 550 must be held perpendicular to the surface of the tube to be cut.
Turn on the power for the Model 550 and begin the tube sever.
After the tube has severed, continue rotation, observing the cutting wheels until they
have returned to the home position.
Turn the power off.
Remove the Model 550 from the tube.