Filter
Top Products
ENGLISH
5
• Do not grind on the sides of grinding
wheels unless they are specifically
designed for that purpose.
• Do not overtighten wheel clamp nut. This
may crack the grinding wheel.
• Clean the cavity around the grinding wheel
periodically.
• Wear protective glasses.
• Do not use damaged or misshapen wheels
or brushes.
• The adjustment of the spark arrestor shall
be made frequently, so as to compensate
the wear of the wheel, keeping the
distance between the guard and the wheel
as small as possible, but in any case not
greater than 2mm;
• The adjustment of the work rest shall be
done gradually so as to compensate the
wear of the wheel, keeping the distance
between the work rest and the wheel
as small as possible, but in any case not
greater than 2mm.
• Allow the tool to cool down after a
continuous use of 20 minutes (S2 20min).
Residual Risks
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment of hearing.
– Risk of personal injury due to flying particles.
– Risk of burns due to accessories becoming hot
during operation.
– Risk of personal injury due to prolonged use.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear eye protection.
Wear ear protection.
S2 20min The short-time duty is 20min.
DATE CODE POSITION (FIG. 1)
The date code (i), which also includes the year of
manufacture, is printed into the housing.
Example:
2014 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Bench grinder
1 Wheel
2 Pairs of tool rests
2 Pairs of spark guards
2 Pairs of mounting brackets
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. Spark guard
b. Switch
c. Tool rest
INTENDED USE
This bench grinder is ideal for use in sharpening
chisels, axes and other wood-cutting tools. It is also
useful for repairing tips on screwdrivers and drill bits
or for removing excess metal burrs from pieces of
cut metal. With the proper accessories, this tool
can be used for cleaning metal surfaces using a
wire brush or for buffing and polishing using a cloth
wheel. Never use this bench grinder for cut-off
operations.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
This grinder is professional power tool. DO NOT let
children come into contact with the tool. Supervision
is required when inexperienced operators use this
tool.
• This product is not intended for use by persons
(including children) suffering from diminished
physical, sensory or mental abilities; lack of
experience, knowledge or skills unless they are
supervised by a person responsible for their
safety. Children should never be left alone with
this product.