Filter
Top Products
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to these
symbols.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which,
if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR
ANY D
EWALT TOOL, CALL US TOLL FREE AT: 1-800-4-DEWALT
(1-800-433-9258).
WARNING: To reduce the risk of injury, read the instruction
manual.
Important Safety Instructions
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
READ ALL INSTRUCTIONS
Grounding Instructions
This tool should be grounded while in use to protect the operator
from electric shock. The tool is equipped with a 3-conductor cord
and 3-prong grounding type plug to fit the proper grounding type
receptacle. The green (or green and yellow) conductor in the cord is
the grounding wire. Never connect the green (or green and yellow)
wire to a live terminal. If your unit is intended for use on less than
150V, it has a plug that looks like that shown in sketch A. If it is
for use on 150 to 250 V, it has a plug that looks like that shown in
sketch D. An adapter, sketches B and C, is available for connecting
sketch A type plugs to 2-prong receptacles. The green-colored rigid
ear, lug, or the like, extending from the adapter must be connected
to a permanent ground, such as a properly grounded outlet box.
No adapter is available for a plug as shown in sketch D. ADAPTER
SHOWN IN FIGURES B and C IS NOT FOR USE IN CANADA.
A
B
C
D
GROUNDING PIN
GROUNDED
OUTLET
BOX
GROUNDING
MEANS
GROUNDING PIN
ADAPTER
Safety Instructions For All Tools
• KEEP WORK AREA CLEAN. Cluttered areas and benches invite
injuries.
• CONSIDER WORK AREA ENVIRONMENT. Don’t expose
power tools to rain. Don’t use power tools in damp or wet
locations. Keep work area well lit. Do not use tool in presence of
flammable liquids or gases.
• GUARD AGAINST ELECTRIC SHOCK. Prevent body contact
with grounded surfaces. For example; pipes, radiators, ranges,
and refrigerator enclosures.
1