Filter
Top Products
REPLACEMENT PARTS
Use only identical replacement parts. For a parts list or to order parts, visit our website at
servicenet.deltamachinery.com.
You can also order parts from your nearest factory-owned branch, or by calling our Customer Care Center at 1-800-223-7278 to
receive personalized support from highly-trained technicians.
SERVICE AND REPAIRS
All quality tools will eventually require servicing and/or replacement of parts. For information about Delta Machinery, its factory-
owned branches, or an Authorized Warranty Service Center, visit our website at www.deltamachinery.com or call our Customer
Care Center at 1-800-223-7278. All repairs made by our service centers are fully guaranteed against defective material and
workmanship. We cannot guarantee repairs made or attempted by others.
You can also write to us for information at Delta Machinery, 4825 Highway 45 North, Jackson, Tennessee 38305 - Attention:
Product Service. Be sure to include all of the information shown on the nameplate of your tool (model number, type, serial number,
etc.)
SERVICE
A complete line of accessories is available from your Delta Supplier, Porter-Cable • Delta Factory Service Centers, and
Delta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog or for the name of
your nearest supplier.
Since accessories other than those offered by Delta have not been tested with this product, use
of such accessories could be hazardous. For safest operation, only Delta recommended accessories should be
used with this product.
ACCESSORIES
Two Year Limited New Product Warranty
Delta will repair or replace, at its expense and at its option, any new Delta machine, machine part, or machine accessory which in normal
use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a Delta factory service
center or authorized service station with proof of purchase of the product within two years and provides Delta with reasonable opportunity
to verify the alleged defect by inspection. For all refurbished Delta product, the warranty period is 180 days. Delta may require that electric
motors be returned prepaid to a motor manufacturer’s authorized station for inspection and repair or replacement. Delta will not be responsible
for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made or specifically authorized by anyone
other than an authorized Delta service facility or representative. Under no circumstances will Delta be liable for incidental or consequential
damages resulting from defective products. This warranty is Delta’s sole warranty and sets forth the customer’s exclusive remedy, with respect
to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly
disclaimed by Delta.
WARRANTY
To register your tool for warranty service visit our website at www.deltamachinery.com.
The following are trademarks of PORTER-CABLE
•
DELTA (Las siguientes son marcas registradas de PORTER-CABLE
•
DELTA S.A.) (Les marques suivantes sont
des marques de fabriquant de la PORTER-CABLE
•
DELTA): Auto-Set
®
, BAMMER
®
, B.O.S.S.
®
, Builder’s Saw
®
, Contractor’s Saw
®
, Contractor’s Saw II™, Delta
®
,
DELTACRAFT
®
, DELTAGRAM™, Delta Series 2000™, DURATRONIC™, Emc²™, FLEX
®
, Flying Chips™, FRAME SAW
®
, Grip Vac™, Homecraft
®
, Jet-Lock
®
,
JETSTREAM
®
, ‘kickstand
®
, LASERLOC
®
, MICRO-SET
®
, Micro-Set
®
, MIDI LATHE
®
, MORTEN™, NETWORK™, OMNIJIG
®
, POCKET CUTTER
®
, PORTA-BAND
®
,
PORTA-PLANE
®
, PORTER-CABLE
®
&(design), PORTER-CABLE
®
PROFESSIONAL POWER TOOLS, PORTER-CABLE
REDEFINING PERFORMANCE™, Posi-Matic
®
,
Q-3
®
&(design), QUICKSAND
®
&(design), QUICKSET™, QUICKSET II
®
, QUICKSET PLUS™, RIPTIDE™&(design), SAFE GUARD II
®
, SAFE-LOC
®
, Sanding Center
®
,
SANDTRAP
®
&(design), SAW BOSS
®
, Sawbuck™, Sidekick
®
, SPEED-BLOC
®
, SPEEDMATIC
®
, SPEEDTRONIC
®
, STAIR EASE
®
, The American Woodshop
®
&(design),
The Lumber Company
®
&(design), THE PROFESSIONAL EDGE
®
, THE PROFESSIONAL SELECT
®
, THIN-LINE™, TIGER
®
, TIGER CUB
®
, TIGER SAW
®
, TORQBUSTER
®
,
TORQ-BUSTER
®
, TRU-MATCH™, TWIN-LITE
®
, UNIGUARD
®
, Unifence
®
, UNIFEEDER™, Unihead
®
, Uniplane™, Unirip
®
, Unisaw
®
, Univise
®
, Versa-Feeder
®
, VERSA-
PLANE
®
, WHISPER SERIES
®
,WOODWORKER’S CHOICE™.
Trademarks noted with ™ and ® are registered in the United States Patent and Trademark Office and may also be registered in other countries. Las Marcas Registradas con
el signo de ™ y ® son registradas por la Oficina de Registros y Patentes de los Estados Unidos y también pueden estar registradas en otros países. Marques déposées,
indiquées par la lettre ™ et ®, sont déposées au Bureau des brevets d’invention et marques déposées aux Etats-Unis et pourraient être déposées aux autres pays.
Delta Machinery
4825 Highway 45 North
Jackson, TN 38305
www.deltamachinery.com