Filter
Top Products
42
Advanced > Routing > RIP Configuration
LAN RIPv1
Select RIPv1 or RIPv2 for use by the router on your LAN.
LAN RIPv2 Select RIPv1 or RIPv2 for use by the router on your LAN.
WAN RIPv1 Select RIPv1 or RIPv2 for use by the router on the WAN.
WAN RIPv2 Select RIPv1 or RIPv2 for use by the router on the WAN.
State Select On or Off to enable or disable RIP on either the LAN or the
WAN
RIP − Routing
Information Protocol −
specifies how routers
exchange information.
With RIP, routers
occasionally exchange
entire routing tables.
You can select RIPv1 or
RIPv2 by clicking the
radio button under the
Version heading, and
then select On or Off by
clicking the radio button
under the State heading.