Filter
Top Products
47
Tools > Admin
Web Port Number The port number used to access the Broadband Router. The
default port number for web management is 80.
WAN Access Control
WAN access control allows remote management via the DI-624
to be configured from the Internet by a web browser. A
username and password are still required to access the
Web-Management interface. In general, only a member of your
network can browse the built-in web pages to perform
Administrator tasks. This feature enables you to perform
Administrator tasks from the remote (Internet) host. Click the
radio button to Enabled to activate this feature.
Enter the password, admin, here and the same password in the
Confirm Password field. This will be the password that the
administrator will use to gain access to the configuration menu
of the device. There is no default password for this device.
At this page, the DVG-1402S
administrator can change the
system password. There are
two accounts that can
access the Broadband
Router’s Web-Management
interface. They are admin
and user. Admin has
read/write access while user
has read-only access. User
can only view the settings
but cannot make any
changes.
Administrator
Password