Filter
Top Products
14
Fig. 31
Fig. 32
Fig. 33
Fig. 34
AUXILIARY WOOD FENCE
WARNING: When performing multiple or repetitive
cut-off operations that result in small cut-off pieces, one
inch or less, it is possible for the saw blade to catch the
cut-off pieces and project them out of the machine or
into the blade guard and housing, possibly causing
damage or injury. In order to limit the possibility of per-
sonal injury or blade guard damage, an auxiliary wood
fence can be mounted to your saw as follows:
Holes are provided in the fence to attach an auxiliary
fence (A) Fig. 31. This auxiliary fence is constructed of
straight wood approximately 1/2 inch thick by 3 inches
high by 20 inches long. NOTE: The auxiliary fence (A) is
used ONLY with the saw blade in the 0 degree bevel
position (90 degrees to the table). When bevel cutting
(blade tilted) the auxiliary fence will have to be removed.
GENERAL CUTTING
OPERATIONS
1. Your compound miter saw has the capacity to cut
standard 2 x 6’s at the straight 90 degree cut-off posi-
tion, as shown in Fig. 32, or at the 45 degree bevel posi-
tion, as shown in Fig. 33.
2. Cutting a standard 4 x 4 is easily accomplished with
your compound miter saw, as shown in Fig. 34.
A
A