Filter
Top Products
10
Charging the battery pack Fig. [5]
L
The battery pack is delivered partially charged.
Charge the battery pack completely before us-
ing for the first time.
X
To charge the battery pack, put it on the retainer
[4-1]
on the charger.
X
To remove, pull off the charged battery pack.
The charger MXC can be used to charge all Festool
battery packs of the BP-XS series.
The LED
[4-2]
on the charger indicates the respec-
tive operating status of the charger.
LED yellow - lit continuously
Charger is ready to use.
LED green - flashing quickly
Battery pack will be charged with max. current.
LED green - flashing slowly
Battery Pack is charged to 80 % and will be charged
with further reduced current.
LED green - lit continuously
Battery pack is fully charged.
LED red - lit continuously
Battery temperature is outside the permitted
range.
LED red - flashing
General fault display, e. g. incomplete contact,
short circuit, battery pack faulty, etc.
Charger wall mount
The charger MXC has two elongated holes on its
back. It can be mounted on a wall using two screws
(e.g. round head or flat head screw with shank di-
ameter of 5 mm) (see Fig.
Fig. [5]
).
3-1
3
4-2
4-1
4
5
85 mm
3 mm
(3 '')
11
32