Filter
Top Products
8
tool may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal
parts of the tool "live" and shock the operator.
Health hazard by dust
WARNING!
Various dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals
known (to the State of California) to cause cancer,
birth defects or other reproductive harm. Some ex-
amples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and
other masonry products, and
• arsenic and chromium from chemicallytreated
lumber.
The risk from these exposures
varies, depending on how often
you do this type of work. To re-
duce your exposure to these
chemicals: work in a well ven-
tilated area, and work with ap-
proved safety equipment, such as dust masks that
are specially designed to filter out microscopic par-
ticles. Wash hands after handling.
Technical data
* Speed specifications with fully charged battery
pack.
WARNING
TO REDUCE THE RISK OF INJURY, USER MUST
READ INSTRUCTION MANUAL.
Cordless drill CXS
Motor voltage 10.8 V
Idling speed* 1st gear 0 - 400 /min
2nd gear 0 - 1200 /min
Max. torque
Soft material (wood) 10 Nm
Hard material (metal) 16 Nm
Adjustable torque 1st gear 0.2 - 2.4 Nm
2nd gear 0.2 - 2.4 Nm
Chuck clamping range 1 - 8 mm
Drill diameter max.
Wood 12 mm
Metal 8 mm
Tool holder in drill spindle 1/4 ’’
Weight without battery pack with Centrotec 0.7 kg
Charger MXC
Mains voltage (input) 120 V ~
Mains frequency 50/60 Hz
Charging voltage (output) 10.8 V
Rapid charging typ. 2.8 A
Charging times for
LiIon 1,3 Ah, 80 %/ 100 % approx. 20/ 30
min
Permitted charging temperature
range
-5 °C to +45°C
Temperature monitoring via NTC-resistor
Battery pack XS-AS
Order number 497520
Voltage 10.8 V
Capacity 1.3 Ah
Number of cells 3
Weight 0.2 kg