Filter
Top Products
12
X
When attaching the tool, rotate until the hexa-
gon shank
[6-1]
engages in the hexagon holder
on the drill spindle.
X
Release the ring
[6-2]
.
Chuck BF-FX 8
The chuck BF-FX 8 is used for clamping drill and
screwdriver bits up to 8 mm chuck diameter.
Attaching the chuck BF-FX 8
X
Attach the chuck to the drill spindle
[7-5]
.
X
Pull the release ring
[7-3]
forwards.
X
Turn until the hexagon pin
[7-4]
on the chuck
engages in the hexagon socket holder in the
drill spindle.
X
Push the chuck all the way onto the drill spindle.
X
Release the ring
[7-4]
.
Detaching the chuck BF-FX
X
Pull the release ring
[7-4]
forwards.
X
Remove the chuck.
Changing tools
X
Turn the clamping sleeve
[7-2]
anticlockwise to
open the clamping jaws
[7-1]
.
L
The arrow on the spindle indicates the opening
direction.
X
Insert the tool into the chuck.
X
Turn the clamping sleeve
[7-2]
clockwise to
clamp the tool.
Angle attachment XS-AS
The angle attachment XS-AS (partly accessories)
allows you to work (drill, fasten) vertically in rela-
tion to the longitudinal axis on the machine.
Fitting the angle attachment XS-AS
X
Pull the green release ring
[8-1]
forwards.
X
Fit the angle attachment to the drill spindle
[8-
2]
.
X
Turn the attachment until is engages in the re-
quired position.
L
You can engage the angle attachment in 16 dif-
ferent positions.
X
Release the ring
[8-1]
.
Removing the angle attachment XS-AS
X
Pull the green release ring
[8-1]
forwards.
X
Remove the angle attachment.
Changing tools
THe tools can be fixed on the angle attachment via
CENTROTEC tool chuck, the chuck BP-XS 8 or di-
rectly into the drill spindle.
Tool holder in the drill spindle
Bits can be inserted directly in the hexagon socket
holder on the drill spindle
[9-1]
to shorten and re-
duce the weight of the machine.
CAUTION
Risk of injury
X
Clamp the tool centrally in the chuck!
7
BF-FX 8
7-2
7-5
7-3
7-1
7-4
8
XS-AS
2-8
1-8
9
9-1