Filter
Top Products
76
• For PG-1892(L)/PG-289(L)
- When ACT/LNK LED does not light/blink.
• Check that the driver is installed.
• Check the connection with switch and hub.
• Use another port of switch and hub.
• Network may be in the status of inactive transmission. Try to log in from the
other line.
• For PG-2861 (L)
- When ACT/LNK A/B LED does not light/blink.
• Check that the driver is installed.
• Check the connection with switch and hub.
• Use another port of switch and hub.
• Network may be in the status of inactive transmission. Try to log in from the
other line.
LED LED status LAN card status
❑ACT/LNK
Lights up green Links with switch and hub are correctly established.
Blinks green Transmitting/Receiving data.
❑10=OFF
100=GRN
1000=ORG
Lights up amber Card is operating at 1000Mbps speed.
Lights up green Card is operating at 100Mbps speed.
Off Card is operating at 10Mbps speed.
Blinks amber
LED for the card is blinking with [Identify Adapter...] for
"Intel
®
PROSet".
LED type LED status LAN card status
❑ACT/LNK A,
ACT/LNK B
Lights up green Links with switch and hub are correctly established.
Blinks up green
Transmitting/Receiving data.
LED for the card is blinking with [Identify Adapter...] for
"Intel
®
PROSet".
❑10=OFF
100=GRN
1000=ORG
Lights up amber Card is operating at 1000Mbps speed.
Lights up green Card is operating at 100Mbps speed.
Off Card is operating at 10Mbps speed.
ACT/LNK
10=OFF
100=GRN
1000=ORG
ACT/LNK A
ACT/LNK B
10=OFF
100=GRN
1000=ORG