Filter
Top Products
Common Procedures
6 3A1456D
Common Procedures
Pressure Relief Procedure
1. Engage trigger lock.
2. Put control valve UP to release pressure.
Tri gg er Lo ck
Spray Tip Position
Control Valve Position
Do not operate or spray near children. Do not aim the
sprayer at, or spray any person or animal. Keep hands
and other body parts away from the front of the sprayer.
For example, do not try to stop the paint flow with any
part of the body.
This sprayer builds up an internal pressure of 2,000 psi
during use. Follow this Pressure Relief Procedure
whenever you stop spraying and before cleaning,
checking, servicing, or transporting equipment to
prevent serious injury.
Always engage the trigger lock when you stop spraying
to prevent the sprayer from being triggered accidentally
by hand, or if dropped or bumped.
ti14999a
ti14994a
Trigger Locked
Trigger Unlocked
ti14995a
(red ring is visible)
Always perform Pressure Relief Procedure before
adjusting spray tip position.
Tip Forward
(SPRAY position)
Tip Reversed
(UNCLOG position)
ti14991a
ti14985a
ti15510a
UP position
(Releases pump pressure)
DOWN position
(Ready to spray)
ti14999a
ti15425a