Filter
Top Products
Operation
332245E 13
Spray
1. Prime. See Prime, page 11.
2. Follow Pressure Relief Procedure, page 9.
3. Install tip and tip guard on gun.
4. Open bleed type master air valve (C).
5. Turn regulator adjustment knob (E) until gauge (D)
reads desired pressure. Turn clockwise to increase
pressure, counterclockwise to decrease pressure.
6. Disengage gun trigger lock.
7. Spray a test pattern. Read fluid manufacturer’s rec-
ommendations.
8. Flush when done spraying. See Flush, page 10.
9. Follow Pressure Relief Procedure, page 9.
Shutdown
Follow Pressure Relief Procedure, page 9.
Always flush the pump before the fluid dries on the dis-
placement rod. See Flush on page 10.
NOTICE
Do not allow pump to run dry. It will quickly accelerate
to a high speed causing damage.
C
ti21110a
E
D
ti21111a
TI5048a