Filter
Top Products
Maintenance
332574D 13
Replace Chopper Chute Liner
1. Follow Pressure Relief Procedure found within the
RS Gun and Cutter, Operation-Repair manual.
2. Engage trigger lock.
3. Remove the cover.
4. Remove the cutter cover plate.
5. Replace the chute liner.
6. Installation is the reverse of removal.
Replace Muffler Filters
(Kit 24H280)
1. Follow Pressure Relief Procedure found within the
RS Gun and Cutter, Operation-Repair manual.
2. Engage trigger lock.
3. Remove the four screws holding the muffler cap on
to the air motor.
4. Discard the old mufflers and replace.
5. Install the muffler cap and replace the four screws.
FIG. 8
ti21013a
FIG. 9