Graco PT2500 Paint Sprayer User Manual


 
24 820-133
Technical
Data
Power
Requirements
120 V
AC, 60 Hz,
.
. . . . . . . . . . . . .
1
Phase, 15 AMP minimum
Pressure Operating Range
0–3000 psi
.
. . . . . . . . . . . . .
(0 – 210 bar)
Maximum Delivery
0.28 GPM (1.1 liter/min)
.
. . . . . . . . .
Power
Cord
No. 16 A
WG, 3 wire,
.
. . . . . . . . . . . . . . . . .
8.5
feet (2.6 m) long
Inlet Paint Strainer
16 mesh
.
. . . . . . . . . . . . . . . . . . . . . . .
Fluid
Outlet Nipple
1/4 npsm (m).
. . . . . . . . . . . . . . . . . . .
Weight
– without hose and gun
33 lb (14.8 kg)
.
. . . . . . .
Dimensions Height:
20 inch (508 mm)
.
. . . . . . . . . . . . . .
Width:
17.5 inch (444.5 mm)
Depth: 17.5 inch (444.5 mm)
W
etted Parts
Stainless Steel, Zinc-Plated Steel,
.
. . . .
Carbide,
Aluminum, Nylon, Delrin
r
, Monel
Delrin
r
is a registered trademark of the DuPont Company
Graco
Phone
Numbers
TO
PLACE AN ORDER
, contact your Graco distrib
-
utor
, or call this number to identify the distributor
closest to you:
1–800–367–4023 T
oll Free
FOR TECHNICAL ASSIST
ANCE,
service repair
information or assistance regarding the application of
Graco equipment:
1–800–543–0339 T
oll Free
The Sherwin-W
illiams W
arranty and Disclaimers
WARRANTY
The
Sherwin–Williams Company warrants all equipment manufactured by it and bearing its name to be free from defects in mate
-
rial and workmanship on the date of sale by an authorized Sherwin–Williams Company distributor to the original purchaser for
use. As purchaser’
s sole remedy for breach of this warranty
, the Sherwin–Williams Company will, for a period of twelve months
from the date of sale, repair or replace any part of the equipment proven defective. This warranty applies only when the equip
-
ment is installed, operated and maintained in accordance with the Sherwin–Williams Company’
s written recommendations.
This warranty does not cover
, and the Sherwin–Williams Company shall not be liable for
, any malfunction, damage or wear
caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident,
tampering, or substitution of non–Sherwin–Williams Company component parts. Nor shall the Sherwin–Williams Company be
liable for malfunction, damage or wear caused by the incompatibility with the Sherwin–Williams Company equipment of struc
-
tures, accessories, equipment or materials not supplied by the Sherwin–Williams Company
, or the improper design, manufacture,
installation, operation or maintenance of structures, accessories, equipment or materials not supplied by the Sherwin–Williams
Company.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Sherwin–Williams
Company distributor for verification of the claim. If the claimed defect is verified, the Sherwin–Williams Company will repair or re
-
place free of charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If in
-
spection of the equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge,
which charges may include the costs of parts, labor and transportation.
DISCLAIMERS AND LIMITATIONS
The
terms of this warranty constitute purchaser
s sole and exclusive remedy and are in lieu of any other warranties (express or implied),
including
warranty
of merchantability or warranty of fitness for a particular purpose
, and of any non–contractual liabilities, including product liabilities,
based
on negligence or strict liability
. Every form of liability for direct, special or consequential damages or loss is expressly excluded
and denied. In
no case shall the Sherwin–Williams Company’
s liability exceed the amount of the purchase price. Any action for breach of warranty must be brought
within
two (2) years of the date of sale.
EQUIPMENT NOT COVERED BY SHERWIN–WILLIAMS COMPANY WARRANTY
The
Sherwin–Williams Company makes no warranty
, and disclaims all implied
warranties of merchantability and fitness for a particular pur
-
pose
, with respect to accessories, equipment, materials, or components sold but not manufactured by the Sherwin–Williams Company
.
These
items
sold, but not manufactured by the Sherwin–Williams Company (such as electric motor
, switches, hose, etc.) are subject to
the warranty
, if any
, of their manufacturer
. The Sherwin–Williams Company will provide purchaser with reasonable assistance in
making any claim for breach of these warranties.
The
SHER
WIN–WILLIAMS COMP
ANY
, CLEVELAND, OHIO 441
15
PRINTED
IN U.S.A.
820–133
March, 1991; Revised December
, 1994