Filter
Top Products
Accessories
313516G 35
HVLP Pressure Verification Kit
For use in checking air cap atomizing and fan
pattern air pressure at various supply air pres-
sures. Not to be used for actual spraying.
Install the kit air cap on the gun. Turn on the air
to the gun, then trigger the gun and read the
air pressure on the gauge.
NOTE: To be “HVLP compliant,” the atomizing
and fan pattern air pressure must not exceed
10 psi (70 kPa, 0.7 bar).
Inline Fluid Filter 24B707
Filter is removable without disconnecting the
fluid line. Includes housing, o-ring, and
0.005 in. tip filter (equivalent to 100 mesh
screen).
Spray Tip Filters
Final filter to prevent foreign particles from
ruining sprayed surface smoothness.
Tips
Part No. Description
289563 HVLP General Metal
289568 HVLP High Wear 0.059 in. (1.5 mm)
289569 HVLP High Wear 0.070 in. (1.8 mm)
289566 HVLP Wood
FIG. 26: HVLP Pressure Verification Kit
ti13594a
25-Count
Carton 3-Pack Description
238562 238561 0.005 in. (equivalent to 100
mesh screen)
238564 238563 0.009 in. (equivalent to 60
mesh screen)
Part No. Description
24E484 0.030 in. SST Needle Tips (Pack of 5)