Installing Tip and Base
12 309225W
Installing Tip and Base
1. Engage trigger lock.
2. Verify tip and guard parts are assembled in
order shown.
3. Screw tip and guard
assembly on gun.
Tighten retaining nut.
Unclogging Spray Tip
To avoid fluid splashback:
• Never pull gun trigger when arrow-shaped
handle is between SPRAY and UNCLOG
positions.
• Tip must be pushed all the way into guard.
1. To UNCLOG tip obstruction, point
arrow-shaped handle backward to
UNCLOG position.
2. Aim gun at piece of scrap or cardboard.
3. Pull trigger to clear clog.
Point the arrow-shaped handle on the spray tip
attachment forward to SPRAY and backward to
UNCLOG obstructions.
3'AND3'
3'%&
4RIGGER,OCKED0OSITION
TIA
TIA
retaining nut
black rubber
gasket
metal seat
guard
tip
TIA
7,D
Use tip to align seat
in guard.
Tip must be pushed
all the way into guard
TIA
TIA
SPRAY position
(pull trigger to paint)
UNCLOG position
(pull trigger to clear
clogged tip)