Storage
309225W 21
5. Turn pressure control knob
clockwise until the pump
turns on.
6. When storage fluid comes
out of prime tube (5-10 seconds) turn
power switch OFF.
7. Turn Spray-Prime/Drain
valve to SPRAY to keep
storage fluid in sprayer dur-
ing storage.
Stowing Sprayer
1. Screw inlet screen onto suction tube.
2. Coil hose. Leave it connected to sprayer.
3. Wrap power cord around cord wrap (XR7
and XR9 models).
4. Secure a plastic bag around suction tube to
catch any drips.
5. Store sprayer indoors.
CAUTION
• Before storing sprayer make sure all water
is drained out of sprayer and hoses.
• Do not allow water to freeze in sprayer or
hose.
• Do not store sprayer under pressure.
TIA
302!9
TIA
INLETSCREEN
TIA
WLD
TIA
WLD