Filter
Top Products
Operation
309295L 15
Operation
Low Voltage Adjustment
(Smart Guns Only)
The ES HI/LO switch enables you to switch between full
voltage and a lower voltage output. The lower voltage is
factory set, but can be adjusted.
1. Set the ES HI/LO switch to LO.
2. Remove the LOW VOLTAGE adjustment plug (53).
Set the desired voltage, using a small screwdriver to
slide switches 1 and 2 ON or OFF, according to
Table 1 . Also see F
IG. 4.
Fig. 4. Low Voltage Adjustment Switches
INSTRUCTIONS
Refer to the gun operation manual (supplied)
for Setup, Shutdown, and Daily Care
procedures.
Table 1: Low Voltage Adjustment
12kV
ON ON 70
ON OFF 60
OFF ON 50
OFF OFF 40
100
%
KV
μα
0
ti1529a
53
12
ON
OFF