Filter
Top Products
Mixing Material
313384B 11
Mixing Material
1. Slowly add one bag of texture to clean water as
instructed on bag. For best results, do not use par-
tial bags.
2. Agitate to a smooth, lump-free consistency.
3. After texture is thoroughly mixed, gently set ball end
of Material Thickness gauge on surface of mixture.
4. Observe ball on material. When material is thin
enough to spray, ball will sink completely into mix-
ture.
5. If ball does not sink completely into mixture within
10 seconds add more water, agitate again and
repeat test.
NOTICE
Do not use any solvent-based materials. Use
water-based materials only. Proper material mixture is
essential. Pump will not operate if material is too thick.
NOTE: For best results, mix material in a separate
container and pour it into hopper.
WATER
ti3906a
ti3907a
NOTE: For accurate test, be sure gauge is com-
pletely dry and clean before each use.
NOTE: Thicker materials that do not pass Material
Thickness Gauge test can still be used. Before
spraying thicker materials, test pump performance
first. If material is too thick, pump will perform
poorly.