Filter
Top Products
Wetting Hose
313384B 9
Wetting Hose
Wet inside of hose before each use to flush out sedi-
ment and prevent texture material from packing out
hose.
1. Pour one (1) gallon (3.8 liters) of clean water into
hopper.
2. Close gun air valve (23).
3. Turn air inlet valve (E) open. Aim gun into hopper
(G) and trigger gun to circulate water for a few min-
utes to wet inside of material hose.
4. Trigger gun into waste pail until hopper no longer
contains water.
5. Open gun air valve (23) to relieve compressor air.
closed
ti4005
23
WASTE
ti4290a
TI
23