Filter
Top Products
-10-
G0474/G0475 Sandblasters
Operation Safety
SECTION 3: OPERATIONS
NOTICE
If you have never used this type of equip-
me
nt before, WE STRONGLY RECOMMEND
that you read books, trade magazines, or
get formal training before beginning any
projects. Regardless of the content in this
section, Grizzly Industrial will not be held
liable for accidents caused by lack of train-
ing.
4. Move the tank air supply lever to the OFF or
closed position (see Figure 8).
Figure 8. Tank air supply valve, closed.
5. Move the blast hose air supply lever to the
OFF or the closed position (see Figure 9).
Basic Operation
The Model G0474/G0475 Sandblasters are
equipped with an industrial-duty blast nozzle,
tank, ball valves, hoses, pressure gauge, and
water separator.
To use the sandblaster:
1. PUT ON safety glasses, gloves, and
respirator. Always wear these protective
items when operating and while servicing
your sandblaster!
2. Select the appropriate sanblasting abrasive
for your sandblaster.
Refer to Page 13 for
types.
3. Install the correct nozzle into the arbor for the
abrasive type hose size, air pressure and CFM
you will use. Refer to Page 13 for options.
Figure 9. Blast hose air supply valve, closed.
Sandblasting presents a real hazard of silicosis and other lung contamination injuries! These
Injuries are permanent and can get worse over time. If you use sandblasting equipment without
the proper headgear, eye protection, and respirator, your lungs and eyes may become irreversibly
contaminated. DO NOT use this sandblaster unless you know how to use it, protect yourself
correctly, and keep all unprotected bystanders away. For latest types of protective equipment and
acceptable respirator types, contact your local OSHA or NIOSH office.