Filter
Top Products
-6-
G0474/G0475 Sandblasters
Additional Safety Instructions for
Sandblasters
8. MAINTAINING EQUIPMENT. Check air
lines and fittings for any leaks, and replace
lines and reseal fittings immediately.
9. SAFE SAND BLASTING. Do not use sys
-
tem over the rated PSI.
10. CORRECT LIGHTING. Always make sure
that you have adequate lighting when sand
-
blasting.
11. LOADING & UNLOADING. Close the air
supply ball valve and discharge the air tank
before disconnecting the air supply line.
12. SAFE MAINTENANCE. Disconnect air
supply and discharge the air tank and all
lines before doing maintenance.
13. SAFE SANDBLASTING. Always secure
the workpiece before sandblasting.
1. CORRECT ABRASIVES. Never use wet
abrasives in this sandblaster, it is designed
for dry abrasives only.
2. PROTECTING LUNGS. Make sure that you
always use an OSHA approved respirator
when using or cleaning the sandblaster.
3. LEAVING THE AREA. Always disconnect
air supply when leaving the sandblaster.
4. PROTECTING EYES. Make sure that you
always use the dust hood when using or
cleaning the sandblaster.
5. PROTECTING ENVIRONMENT. Always
sandblast in an area where the spread of
abrasive dust can be contained.
6. WORK AREA SAFETY. Clean compressor
and equipment air filters often, and repair
any air hose leaks immediately.
7. MAINTAINING COMPONENTS. Replace
nozzles, hoses, lenses, and safety gear
when they become worn.
No list of safety guidelines can be complete.
Every shop environment is different. Always
consider safety first, as it applies to your
individual working conditions. Use this and
other equipment with caution and respect.
Failure to do so could result in serious per-
sonal injury, damage to equipment, or poor
work results.
There is potential danger when operating
this equipment. Accidents are frequently
caused by lack of familiarity or failure to pay
attention. Use this equipment with respect
and caution to lessen the possibility of
operator injury. If normal safety precautions
are overlooked or ignored, serious personal
injury may occur.