Figure 18.
This
number is an approximation and has been pro-
vided for estimation purposes only.
Tools Needed Qty
Hardware Needed Qty
To connect the resaw to a dust collector:
1.
Figure 18
Connecting to the
Dust Collector
Hardware Needed Qty
To install the blade:
1. Disconnect the resaw from the power
source!
2.
3.
4.
Figure 19
These instructions present
a serious injury hazard if
done while the machine
is connected to power. DO
NOT connect to power until
instructed!
Figure 19.
Installing the Blade
2.