Filter
Top Products
-10- 18" & 20" Super Heavy-Duty Bandsaws
SECTION 5: SET UP
Piece Inventory
After all the parts have been removed from the
carton, you should have:
• Bandsaw Unit with Blade
• Table and Fence Rail
• Fence
• Dust Port
• Miter Gauge
• Hardware Bag
(4) Phillip Head Screws
(4) Hex Bolts
(4) Flat Washers
In the event that any non-proprietary parts are
missing (e.g. nuts or washers), we would be glad
to replace them, or for the sake of expediency,
replacements can be obtained at your local hard-
ware store.
Unpacking
The 18" and 20" Super Heavy-Duty Bandsaws
are shipped from the manufacturer in a carefully
packed crate. If you discover the machine is dam-
aged after you have signed for delivery, please
call Customer Service immediately for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise filing a freight claim can be difficult.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
Some metal parts may
have sharp edges on
them after they are
formed. Please examine
the edges of all metal
parts before handling
them. Failure to do so
could result in injury.
The 18" and 20" Super
Heavy-Duty Bandsaws
are heavy machines. DO
NOT over-exert yourself
while unpacking or
moving your machine –
you will need assis-
tance and power equip-
ment. Serious personal
injury may occur if safe
moving methods are not
followed.