Filter
Top Products
G0513X/G0514X/G0514X3 Extreme Series Bandsaw
-17-
Inventory
After all the parts have been removed from the
crate, you should have the following items:
Crate Contents (Figure
7 & 8): Qty
A. Bandsaw (not shown) .................................
1
B.
Table ........................................................... 1
C. Miter Gauge ................................................ 1
D. Back Square Tube ...................................... 1
E.
Resaw Fence ............................................. 1
F. Front Rail ...................................................
1
G. Fence Assembly .........................................
1
Hardware and Tools: Qty
• Eye Bolt M10-1.5 (may be installed) .......... 1
• Flat Washers 8mm
(Table, Pos. Stop, Fence) ..........................
7
• Lock Washers 8mm (Table) ....................... 4
• Hex Bolts M8-1.25 x 16 (Table) ................. 4
• Hex Bolt M8-1.25 x 90 (Pos. Stop) ............ 1
• Hex Nuts M8-1.25 (Pos. Stop, Fence) ....... 2
• Table Pin .................................................... 1
• Table Insert ................................................
1
• Cap Screws M6-1 x 16 (Fence) .................
2
• Hex Bolts M6-1 x 20 (Fence) .....................
2
• Fence Handle M8-1.25 x 22
(Fence) ......... 1
• Lock Washers 6mm (Fence) ......................
2
• Flat Washers 6mm (Fence) ........................
2
• Rail Pad M6 x 18 (Fence) ..........................
1
• Hex Nut M6-1 (Fence) ................................
1
• Lock Handle M8-1.25 x 44 (Fence) ............
1
• Moving Plate (Fence) .................................
1
• Hex Wrench 5mm & 8mm .....................1 Ea
• Open End Wrench 10 x 13mm ................... 1
Figure 7. Bandsaw components.
B
C
D
Figure 8. Fence components.
D
E
G
F
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or for the sake of expedi
-
ency, replacements can be obtained at your local
hardware store.
NOTICE
Some hardware/fasteners on the inventory
list may arrive pre-installed on the machine.
Check these locations before assuming that
any items from the inventory list are miss
-
ing.