Filter
Top Products
Assembly
Some metal parts may have
sharp edges that can cause
minor injury. Please exam-
ine the edges of all metal
parts BEFORE handling
them and be careful WHILE
handling them.
To assemble the bandsaw:
1.
Figure 8
Note: Only hand-tighten the stand fasteners
for now during these initial steps. Once the
stand is fully assembled you will be instructed
to fully tighten all fasteners.
Figure 8.
2.
Figure 9
Figure 9.
3.
Figure 10
Note: Adjust the feet so that they are approxi-
mately the same height—this will make level-
ing the stand easier in a later step.
Figure 10.