Filter
Top Products
5.
Note: Do not rely on this setting for long
periods of time because the blade will stretch
with use.
Additionally, with extended use, the blade
tensioning system may need to be reset for
correct operation. Refer to the Resetting
Blade Tensioner in the Service section on
this manual.
Adjusting Blade
Support Bearings
Whenever changing a blade or adjusting
tension and tracking, the upper and lower
support bearings and blade guides must be
re-adjusted before cutting operations.
Tool Needed Qty
To adjust the support bearings:
1.
2.
3.
Figure 29.
4.
5.
Bandsaw
Blade
Support
Bearing
Figure 30.
When using a
3
⁄4" blade, the blade tensioning
system may need to be reset for correct
operation. Refer to Blade Tensioner on Page
53 for detailed instructions.