Filter
Top Products
G0588/G0591 12" Sliding Table Saws
-19-
Crate 2 .......................................................... Qty
S. Sliding Table (Not Shown) ............................ 1
Hardware and Tools
• Hex Bolt M10-1.5 x 45 ...............................
1
• Hex Nuts M6-1.0 ........................................
3
• Cap Screws M8-1.25 x 30 ..........................
4
• Cap Screws M6-1.0 x 20 ............................
5
• Set Screws M8-1.25 x 20 ...........................
2
• Flat Washer 10mm .....................................
3
• Flat Washers 8mm .....................................
5
• Flat Washers 6mm .....................................
3
• Lock Washers 8mm ...................................
4
• Lock Washer 10mm ...................................
1
• Flip Stops ...................................................
2
• Push Handle M14-2 x 16 w/T-Nut ..............
1
• Lock Knobs M10-1.5 ..................................
2
• T-Hex Wrenches 6, 5, 4mm ..................1 Ea
• Hex Wrenches 6, 3, 2mm .....................1 Ea
• Open End Wrenches
10/12, 14/17, 22/24mm .........................1 Ea
• Combo Wrenches 13, 19mm ................1 Ea
• Push Stick .................................................. 1
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or for the sake of expedi
-
ency, replacements can be obtained at your local
hardware store.
Q. Edge Shoe .................................................. 1
R. Hold Down .................................................. 1
N. Blade Guard/Dust Hood ............................ 1
O. Adjustable Handle M8-1.25 x 28 ................ 1
P. Riving Knife ................................................ 1
Figure 14. Blade guard components.
P
N
O
Figure 15. Included accessories.
Q
R
J. Crosscut Table ........................................... 1
K. Crosscut Table Lock Plate ......................... 1
L. Adjustable Handles M10-1.5 ...................... 2
M. Crosscut Aluminium Fence ........................ 1
Figure 13. Crosscut table components.
L
J
K
M