Filter
Top Products
G0588/G0591 12" Sliding Table Saws
-43-
Always disconnect power
to the machine before
performing maintenance.
Failure to do this may
result in serious person
-
al injury.
Cleaning the Model G0588/G0591 is relatively
easy. Vacuum excess wood chips and sawdust,
and wipe off the remaining dust with a dry cloth.
Use compressed air to blow dust from between
the two sections of the sliding table. If any resin
has built up, use a resin dissolving cleaner to
remove it. Treat all unpainted cast iron and steel
with a non-staining lubricant after cleaning.
Cleaning
SECTION 6: MAINTENANCE
Protect the unpainted cast iron surfaces on the
table by wiping the table clean after every use—
this ensures moisture from wood dust does not
remain on bare metal surfaces.
Keep tables rust-free with regular applications of
products like G96
®
Gun Treatment, SLIPIT
®
, or
Boeshield
®
T-9 (see SECTION 5: ACCESSORIES
on Page 40 for more details).
Unpainted Cast Iron
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily Check
:
• Loose mounting bolts.
• Worn or damaged saw blade.
• Worn or damaged switches or wires.
• Any other unsafe condition.
Weekly Maintenance:
• Clean sliding table surface and grooves.
• Clean the cast iron saw table.
• Clean the sliding table roller guideways.
• Clean the rip fence and sliding grooves.
• Clean the rip fence bracket.
Monthly Check:
• Clean/vacuum dust buildup from inside cabi
-
net and off motor.
• V-belt tension, damage, or wear.
Note:
Adjust V-belt tension after the initial 10
hours of operation.
Schedule