Filter
Top Products
G0657/G0658 Benchtop Lathe
-17-
Operation Safety
SECTION 4: OPERATIONS
Loose hair and cloth-
ing could get caught in
machinery and cause seri
-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC
-
OMMEND that you read books, trade maga
-
zines, or get formal training before begin
-
ning any projects. Regardless of the con
-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear a face
shield, respirator, and hearing protection
when operating this machine.
Basic Controls
Use the descriptions and figures below to become
familiar with the basic controls of your lathe.
Lathe ON/OFF Switch: Turns power ON/OFF to
the
lathe motor, which rotates the spindle.
Speed Adjust Knob: Adjusts the speed of the
spindle within the current belt position speed
range.
RPM Display: Displays the spindle speed in revo
-
lutions per minute (RPM).
Figure 13. Control Panel.
ON/OFF Switch
Speed Adjust Knob
Speed Display