Filter
Top Products
-28-
G0657/G0658 Benchtop Lathe
SECTION 5: ACCESSORIES
ACCESSORIES
G1194—3-Jaw Chuck
A "must have" for the serious wood turner. This
3-jaw chuck is a self-centering style chuck used
mostly for round work. All three jaws tighten
together at the same time. Jaws are reversible for
expanded work holding capacity. Threaded insert
required for mounting!
Figure 42. Model G1194 3-Jaw Chuck.
G1082—4-Jaw Chuck
Another "must have" for the serious wood turner.
This 4-jaw chuck is an independent type chuck
that is used for square and odd-shaped pieces.
Each jaw tightens individually and can be turned
around to hold larger dimension workpieces.
Threaded insert required for mounting!
Figure 43. Model G1082 4-Jaw Chuck.
H7828—Tool Table Plus
The new Tool Table Plus was designed in response
to customer requests for a slightly wider and
taller table to accommodate small planers, wood
lathes, sanders and a variety of other bench-top
machines.
Figure 44. Model H7828 Tool Table Plus.
Figure 45. Model H6542 Robert Sorby 8-PC Set.
H6542—Robert Sorby HSS 8-PC Turning Set
G1676—Drill Chuck Arbor MT#2 x JT#3
H6204—Precision Drill Chuc
k
1
⁄32"–
5
⁄8" x JT#3
H3102, H3103, H3104—Gouge Slipstones
H1064—6-PC Deluxe HSS Lathe Chisel Set
G9863—8-PC HSS Lathe Chisel Set
H0507—20" Swan Neck Hollowing Tool
H0508—24" Swan Neck Hollowing Tool
G3163—1" x 8 TPI RH Threaded Insert.
This threaded insert is required to mount a 3- or
4-jaw chuck to your wood lathe.