Filter
Top Products
SECTION 4: OPERATIONS
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
Operation Safety
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
Basic Controls
Saw Release Knob:
Feed Rate Adjust Knob:
Bandsaw Start/Stop Switch: ON
OFF
Damage to your eyes and lungs could result
from using this machine without proper pro-
tective gear. Always wear safety glasses and
a respirator when operating this machine.
The bandsaw blade is
sharp and can easily cut
your hand or fingers.
Always disconnect the
power and wear heavy
leather gloves when
making adjustments to
or near the blade.
Figure 13.
ELECTROCUTION HAZARD
This bandsaw is not designed to be used
with water soluble cutting fluid or coolant.
If needed, use a small amount of oil-based
lubricant.