Grizzly G0659 Saw User Manual


  Open as PDF
of 60
 



        




       
Page 33
To adjust the feed rate:
1.          
       
Figure 22
Figure 22.






2. 

3.     


4. 

Feed Rate
To adjust the depth of cut:
1. 



Figure 21
Figure 21.


NOTICE
This bandsaw will damage the vise and
table if the depth of cut and saw frame stop
are not properly adjusted. Before making
any cuts, check that the blade will not con-
tact the table or vise when it is positioned
all the way forward.
Cutting Depth
 previous next