Filter
Top Products
Lubrication
Bearings
Blade Tension Leadscrew
Figure 49
Figure 49.
Saw Release Lever Mechanism
Figure 50
Gearbox (Figure 51)
Use a mirror to inspect the oil level through the
sight glass. If the level is low, inspect for leaks and
replace seals if necessary, then refill to the level
indicated on the sight glass.
Change gear box oil by removing the drain plug
on the lower edge of the gear box (out of view).
Replace the drain plug and refill through the fill
cap with SAE-90 oil. Fill to the mark indicated on
the sight glass.
Chip Tray
Figure 51. Gearbox lubrication.
Drain Plug Location
(Hidden From View)
To remove the chip tray:
1.
2.
3.
Figure 50.