Filter
Top Products
Blade Tensioning
To correctly tension the blade:
1.
2.
3.
Figure 33
Note: The quickest and easiest way to check
blade tension is to use the Model H5408
Blade Tensioning Gauge (refer to Page 34)
NOTICE
To prolong blade life, release the tension on
the blade if the machine will be idle for an
extended period of time.
6eegdm^bViZan
(
$
-
7aVYZ9Z[aZXi^dc
Figure 33.
Always disconnect power
to the machine when
changing blades. Failure
to do this may result in
serious personal injury.
All saw blades are dan-
gerous and may cause
personal injury. To
reduce the risk of inju-
ry, wear heavy leather
gloves when handling
saw blades.
Blade Changes
To replace the blade:
1.
2.
3.
4.
5.
Note: Make sure the teeth are pointing down
toward the table. If the teeth will not point
downward in any orientation, the blade is
inside out. Remove the blade and twist it right
side-out.
4.
Note: Make sure the blade tracks next to, but
not touching, the upper wheel flange as you
rotate the upper wheel by hand.
5.