Filter
Top Products
2.
Figure 10
3.
Note: Have your assistants steady the load
as you move it to keep it from swinging.
4.
Only use lifting safety hook, chain or lifting
straps, and power lifting equipment rated for
at least 4000 lbs. and in good working con-
dition. Only raise the mill enough to clear
shipping pallet and floor obstacles. If the
mill falls or tips over while moving it, serious
personal injury and property damage could
result.
Bolting to Concrete Floors
Figure 11
Mounting to Shop
Floor
NOTICE
Anchor studs are stronger and more per-
manent alternatives to lag shield anchors;
however, they will stick out of the floor,
which may cause a tripping hazard if you
decide to move your machine.
Figure11
NOTICE
We strongly recommend securing your
machine to the floor if it is hardwired to the
power source. Consult with your electrician
to ensure compliance with local codes.