Filter
Top Products
4.
5.
ON
6.
Note: Power feed rates are difficult to pre-
cisely adjust. We recommend that you exper-
iment with different dial settings to find the
feed rate that best works for your operation.
7.
OFF
Head Movement
Figures 29–30
Figure 29.
Figure 30.
Tools Needed Qty
Tilting the Head
1.
2.
Figure 31
3.
Note: Turn the tilting bolt clockwise to move
the head forward and counterclockwise to tilt
it backward.
4.
Always lock the head firmly in place after
adjusting the tilt or rotation. If the head
unexpectedly moves during milling opera-
tions, the spinning cutter could bind with
the workpiece and break apart, causing per-
sonal injury or property damage.
Figure 31.